Manufactured from durable and lightweight aluminum Tread Plate, Aluminum Angle, and heavy duty steel tubing for high
structural integrity Designed for use for Heavy, and light motorcycles, dirt bikes, scooters, etc. Will handle wheels up
to 10” wide, and loads up to 98” long The Hauler platform is 14” wide, and 96” long, with a ramp of 10” wide and 96” long 

Manufactured in the USA

 Safely and easily transport Heavy Motorcycles up to 1000 pounds with our Motorcycle –Hauler. Complete with long
ramp to ease the bike onto the Hauler, which would store right on the hauler for ease and compact design.
No need for sway bars or anything else to keep your ride stable. This is set-up with two receiver tubes
to handle the heavy weight bikes. Being it is using two receiver tubes, the tubes will have to be
attached by the customers shop. Best way is to have a welding shop weld them onto the two
frame members under the rear of your truck.

 This durable unit will assemble easily and unbolt to remove and store in a very small space. This Hauler makes it accessible
for every garage or storage space. The Aluminum Tread Plate is slip resistant and will look great for years
to come without the rust and corrosion you find on steel decks.

 Included is the Aluminum Tread Plate with welded Aluminum Angles for the Main Deck and the Ramp. Steel 2” x 2” tube
for structural undercarriage to be bolted to Tread Plate. Hardware to assemble included. Also included are two receiver
tubes for you to have installed at your local shop on your vehicle. Due to the variation of vehicles and your
local shop mounting the receiver tubes, the final holes to be drilled in the Aluminum Tread Plate will be the
responsibility of the end user. Holes are pre-drilled in the structural undercarriage as guidance to drill the Tread Plate.

Options are available for our Motorcycle –Hauler;

 Locking Front Wheel Chock (base plate and removable chock) only _______ 

Wheel Chock with installation __________________________________

 Tie-down Rings (4) Stainless heavy duty _____________________________

 Tie-down Rings with installation _______________________________

Light Kit, two lower rear lights with flat four connector ________________ 

Light kit with installation ______________________________________ 

Motorcycle – Haulers are built with user guidelines and safety in mind. They are not recommended to be
mounted on tow behind trailers, fifth wheel, and camping trailers. Never exceed the maximum weight, or suspension
guidelines of vehicle that Motorcycle-Hauler is to be mounted on. Not recommended to use with hitch extenders, or adapters.

All orders are custom fabricated; therefore, we cannot accept returns on custom fabricated Haulers.

Aluminum prices fluctuate rapidly, please call for the latest pricing.